Skip to content

Miami, FL USA|[email protected]|Mon - Fri 09 am – 06 pm EST

Español
(877) 288-0280Español
Talk to an Expert(877) 288-0280

Used Directional Drills for Sale

Explore our inventory of premium horizontal directional drills from industry-leading manufacturers like Vermeer, Ditch Witch, and American Augers. These high-performance rigs offer the reliability and precision required to maximize productivity on demanding underground utility installations. Streamline your procurement process with our competitive pricing and flexible financing options tailored specifically for HDD contractors.

WorldHDD stocks 67 used directional drills in Miami, FL, ready to ship nationwide from $57,000 to $449,000. The lot runs from compact utility rigs such as the Vermeer D8x12 and Ditch Witch JT9 and JT10, through the mid-size workhorses that make up most of our sales (Vermeer D20x22 S3, D23x30 S3 and D24x40 S3, Ditch Witch JT20, JT25 and JT30), up to Vermeer D40x55 and D60x90 class machines and 100,000 lb plus rigs from Vermeer and American Augers.

Every drill is inspected to our Ready-To-Work standard before it is listed: rod and drive train checked, hydraulics pressure-tested, rack, anchors and pipe loader cycled, and the engine hours verified against the rig's history. Pricing is posted on each listing, hours are current, and financing is available on most units. Ask about a package price with a mixing system, locator and drill pipe.

  • Vermeer S3 series, Ditch Witch JT series and American Augers rigs, 10,000 to 140,000 lb pullback
  • Inspected to Ready-To-Work standards with verified hours and posted prices
  • Financing on most units, trade-ins welcome, nationwide shipping from Miami, FL
  • Package pricing with mud systems, DCI locators, drill pipe and trailers

See the inspection checklist we use · Financing options

67 active units across 2 subcategories.

Used Directional Drills for Sale

Explore our inventory of premium horizontal directional drills from industry-leading manufacturers like Vermeer, Ditch Witch, and American Augers. These high-performance rigs offer the reliability and precision required to maximize productivity on demanding underground utility installations. Streamline your procurement process with our competitive pricing and flexible financing options tailored specifically for HDD contractors.

WorldHDD stocks 67 used directional drills in Miami, FL, ready to ship nationwide from $57,000 to $449,000. The lot runs from compact utility rigs such as the Vermeer D8x12 and Ditch Witch JT9 and JT10, through the mid-size workhorses that make up most of our sales (Vermeer D20x22 S3, D23x30 S3 and D24x40 S3, Ditch Witch JT20, JT25 and JT30), up to Vermeer D40x55 and D60x90 class machines and 100,000 lb plus rigs from Vermeer and American Augers.

More about what we stock

Every drill is inspected to our Ready-To-Work standard before it is listed: rod and drive train checked, hydraulics pressure-tested, rack, anchors and pipe loader cycled, and the engine hours verified against the rig's history. Pricing is posted on each listing, hours are current, and financing is available on most units. Ask about a package price with a mixing system, locator and drill pipe.

  • Vermeer S3 series, Ditch Witch JT series and American Augers rigs, 10,000 to 140,000 lb pullback
  • Inspected to Ready-To-Work standards with verified hours and posted prices
  • Financing on most units, trade-ins welcome, nationwide shipping from Miami, FL
  • Package pricing with mud systems, DCI locators, drill pipe and trailers

See the inspection checklist we use · Financing options

67 active units across 2 subcategories.

Browse 67 used directional drills available from WorldHDD. All equipment is inspected to our Ready-To-Work standards with financing available nationwide.

Buyer questions

What size used directional drill do I need?
Match pullback to the job. Fiber and small conduit in soft ground is 10,000 to 20,000 lb class (Vermeer D10x15, Ditch Witch JT10). Most utility contractors run 20,000 to 40,000 lb rigs (Vermeer D20x22 and D24x40, Ditch Witch JT20 to JT30) for gas, water and telecom. Long shots, larger diameter pipe and rock call for 40,000 lb and up. Our sizing guide walks through it, and our team will size a machine to your typical bore.
How many hours is too many on a used directional drill?
Hours matter less than how the rig was maintained. A 3,000 hour drill with clean hydraulics, tight vise jaws and complete service records is a better buy than a neglected 1,500 hour unit. We post current hours on every listing and inspect each machine before sale so you know what you are getting.
How much does a used directional drill cost?
Prices on our lot currently run from $57,000 to $449,000. Compact rigs sit at the low end, mid-size Vermeer and Ditch Witch machines in the middle, and 40,000 lb plus and specialty rock drills at the top. Every listing shows its price, and financing spreads the cost over the life of the machine.
Do you offer financing on used HDD rigs?
Yes. Financing is available on most machines through our lending partners, with terms for new and established contractors. Apply from the financing page or ask when you inquire about a specific drill.
Can I trade in my current drill?
Yes. We buy and take drills, mud systems and locators in trade. Send the model, year, hours and a few photos and we will quote a trade value against any machine on the lot.
Do you ship outside Florida?
Every week. Drills ship from Miami, FL to contractors across the United States and abroad. We arrange the freight and can quote landed cost to your yard.

Directional Drills buyer guides

What to check, what it should cost, and how to right-size the machine before you buy.

  • Directional Drill Sizes Explained: What Size Do You Actually Need?

    What size directional drill do you need? It is a buying question disguised as a technical one. This guide maps job type to size class (mini, utility-mid, mid-heavy, heavy) with verified pullback ranges and example used models, explains the specs that matter, flags the rock exception, and shows how to avoid the costly over- and under-buying traps.

  • The Used Directional Drill Inspection Checklist

    If you are about to spend eighty to two hundred thousand dollars on a used directional drill, the next two hours of your life matter more than any number on the sticker. This is the inspection sequence we use to accept machines into WorldHDD inventory.

  • How Many Hours Is Too Many on a Used Directional Drill?

    Hours are a proxy, not a verdict. The figure buyers hear most is around 5,000 hours, but class, application, and maintenance history decide whether a used directional drill is high hours or still has plenty of life. Here is the framework, with class-by-class numbers and the rebuild math.

Need Help Finding the Right Directional Drills?

Tell us your requirements and WorldHDD will match you with current inventory and financing options.

Use email if you want a written follow-up.

Use phone if you want a call back.

We only need one contact method, but you can provide both.

Include model, specs, quantity, timing, shipping destination, or any trade details that matter.

Submissions go directly to the WorldHDD team for follow-up.